您的位置: 标准下载 » 协会标准 » SAE 美国机动车工程师学会 »

SAE USCAR27 Specification for Testing Gas Discharge Light Source Subsystem

作者:标准资料网 时间:2024-05-16 01:09:52  浏览:8049   来源:标准资料网
下载地址: 点击此处下载
Product Code:SAE USCAR27
Title:Specification for Testing Gas Discharge Light Source Subsystem
Issuing Committee:
Scope:This specification is a general level subsystem light source specification that establishes test requirements of a Gas Discharge Light Source (GDLS) subsystem for use on passenger vehicles.The completed test data to this test specification is intended to be provided to the OEM by the Tier one lamp set maker as part of the lamp assembly PPAP. Re-testing shall be required if any portion of the approved GDLS experiences a design, manufacturing or component change.This document shall be applied to systems that meet the requirements for design, performance and validation established by government standards.The subsystem is defined as the ballast, igniter and light source and shall be tested as a subsystem and considered one test sample for the entire test sequence. A failure of any component in the test sample shall constitute a failure of the entire sample. Substitution or replacement of only the light source shall be allowed during testing. Failure of the light source more than once in a tested system shall constitute a failure of the GDLS. If other manufacture驴s components are intended to be approved for use in the GDLS, then those possible combinations of components shall be considered a new GDLS and shall also be tested.Additional testing may be required by individual OEM驴s to meet specific EMC, quality, reliability and durability objectives.The following tests are to be performed under the following conditions:驴New light source (capsule) or ballast design驴Design or process change made to an existing capsule or ballast, which could affect the outcome of the test驴Completion of one calendar year as noted in the 驴ANNUAL TESTS驴 Table shown in the Appendix. (Note: Production process control data, collected at a shorter interval per an approved control plan, may be substituted if approved by customer驴s responsible engineer and purchasing representative.)
下载地址: 点击此处下载
基本信息
标准名称:自动喷水灭火系统 第10部分:压力开关
英文名称:Automatic sprinkler system-Part10:Pressure switch
中标分类: 医药、卫生、劳动保护 >> 消防 >> 灭火技术
ICS分类: 环保、保健与安全 >> 消防 >> 防火
替代情况:替代GA 29-1992
发布部门:中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会
发布日期:2006-04-07
实施日期:2006-12-01
首发日期:2006-04-07
作废日期:1900-01-01
主管部门:公安部
提出单位: 公安部
归口单位:全国消防标准化技术委员会
起草单位:公安部天津消防科学研究所
起草人:李习民、高云升、刘连喜、白殿涛
出版社:中国标准出版社
出版日期:1900-01-01
页数:平装16开 页数:14, 字数:23千字
计划单号:20020011-Q-312
适用范围

GB5135的本部分规定了自动喷水灭火系统压力开关的型号编制、分类、要求、试验方法及检验规则、标志、包装、运输和贮存。 本部分适用于自动喷水灭火系统中压力开关。 本部分不适用于气体灭火系统的压力开关和易燃易爆危险场合下使用的防爆型压力开关。

前言

没有内容

目录

没有内容

引用标准

GB/T 191 包装储运图示标志
GB 9969.1 工业产品说明书 总则

所属分类: 医药 卫生 劳动保护 消防 灭火技术 环保 保健与安全 消防 防火
【英文标准名称】:Textiles-Determinationoftheslippageresistanceofyarnsataseaminwovenfabrics-Part3:needleclampmethod.
【原文标准名称】:纺织品.机织物中缝线耐滑动的测定.第3部分:针箍法
【标准号】:NFG07-117-3-2007
【标准状态】:现行
【国别】:法国
【发布日期】:2007-06-01
【实施或试行日期】:2007-06-20
【发布单位】:法国标准化协会(AFNOR)
【起草单位】:
【标准类型】:()
【标准水平】:()
【中文主题词】:弓纬和纬斜的测定;布;衣服;定义;测定;替代;织物测试;织物;力;材料测试;方法;针;接缝移动阻力;抽样方法;缝隙;接缝滑动测定;缝纫;缝纫线;剪切阻力;滑动阻器;滑动阻力;测试;试验;纺织测试;纺织品;经线;纬纱;机织物;纱
【英文主题词】:
【摘要】:
【中国标准分类号】:W04
【国际标准分类号】:59_080_30
【页数】:20P;A4
【正文语种】:其他